Spot for 0-gauge

Home / the12volt's Install Bay / Car Audio / Spot for 0-gauge (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

12v_rep

Copper - Posts: 188

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 28, 2004

Location: United States

Posted: May 02, 2004 at 9:31 AM / IP Logged

I personally do not see a need for 1/0 guage wire in this application. It will be a waste of time and money. 4 guage will be sufficient for that amp. I am running the new Pioneer GMD510M 1000w. Mono-Block and (2) Pioneer GM5000T's (760w) amps in my trunk and only using 4 guage with no performance loss. I would recommend running a second battery, but not 1/0 guage. Just my .02 though. As for the ground, the most recommended length is 18" from the battery.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Spot for 0-gauge

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.