Posted: April 27, 2004 at 2:48 PM / IP Logged
Posted: April 27, 2004 at 4:31 PM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version

| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com
Saturday, November 8, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, November 8, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.




Hi, I posted this yesterday and didn't get a reply. I just need someone to point me in the right direction, please. I bought the car from a dealership and they didnt know anything about the alarm. Im pretty savy when it comes to technical things, I am an office machine Tech. The alarm appears to have been installed professionally, I see the relays and the brain for the alarm. Any idea where i might get a manual? And I would take it in to get repaired, but i just quit my job and money is tight now. I don't think it's a big deal, any ideas would be greatly appreciated. 
Hi, I've recently bought a 97 Honda Civic Ex. It is a 5 speed with power everything. I knew it had an alarm when I bought the car but it doesnt work. There is a fuse holder near the battery that is inline with the main power wire for the alarm, with the fuse missing. If I put a fuse in it, the alarm goes off and will not shut off, even when I press the buttons on the transmitter. I've checked all of my fuses inside and out, everything is in order. I've taken the panel off near my fuse box to trace some of the wires coming from the brain of the alarm. I don't see anything out of order, any ideas? I do not have a manual or anything with the alarm, so I don't know how to program it or anything. I just need to find out why the alarm is going off with the fuse inserted and I think it should work fine. 

