matrix 3.5 remote problems

Home / the12volt's Install Bay / Car Security and Convenience / matrix 3.5 remote problems (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bigcoop72

Member - Posts: 20

Joined: December 16, 2003

Location: United States

Posted: April 27, 2004 at 5:04 PM / IP Logged

i have the 3.5 in a '03 monte carlo ls.the problem is the remote works when it feels like.you press the armor dis-arm ,and it beeps 6 times like itsnot getting a signal. swapped out the antennae and remote.worked a couple days now its screwin up again. my next step is to swap the brain out. any ideas?

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: April 27, 2004 at 5:46 PM / IP Logged

USALLY THE BEEPS ARE A DIAGNOSTIC...NOT TO FAMILIAR W/ THAT UNIT BUT CHECK IT...IS THIS TACH-LESS...?

bigcoop72

Member - Posts: 20

Joined: December 16, 2003

Location: United States

Posted: April 27, 2004 at 9:12 PM / IP Logged

its set on tach

bigcoop72

Member - Posts: 20

Joined: December 16, 2003

Location: United States

Posted: April 27, 2004 at 9:16 PM / IP Logged

that shouldnt have anything to do with arming and disarming

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 27, 2004 at 10:23 PM / IP Logged

check to see if the antenna harness is fell out of place.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

bigcoop72

Member - Posts: 20

Joined: December 16, 2003

Location: United States

Posted: April 28, 2004 at 7:12 PM / IP Logged

everything is connected,nothing loose or cut. getting ready to ditch it and get the new viper

ranquist

Member - Posts: 36

Joined: April 26, 2004

Location: United States

Posted: April 28, 2004 at 7:55 PM / IP Logged

are u sure its 6 and not 5 which means its getting to many false signal and it beeps to report to you of the false trips

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: April 29, 2004 at 10:58 AM / IP Logged

THE mATRIX 3.5 AND THE NEW vIPER ( 791) ARE THE SAME UNIT....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

bigcoop72

Member - Posts: 20

Joined: December 16, 2003

Location: United States

Posted: April 29, 2004 at 4:35 PM / IP Logged

i re-synced the remote and "so far " i havent had a problem.im keepin my fingers crossed matrix 3.5 remote problems -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

matrix 3.5 remote problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.