System Requirements

Home / the12volt's Install Bay / Car Audio / System Requirements (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

engage_vx

Member - Posts: 24

Joined: April 03, 2004

Location: United States

Posted: May 03, 2004 at 11:42 AM / IP Logged

zup fam -

my system is finaly all here I just need a lil' help, there are a couple of things I need to bring to the shop & need a lil' guidance.

I have one kicker 04kx1200.1 to power two S10L7 SoloBarics in an enclosed box & one kicker 04kx650.4 to poweer 4 kicker k60's (that's 6.5's x4)

I need suggestions on ampt kit for it - ? Kicker's specs call for a 1 gauge cable, can I do a two or four gauge instead - ?

Can some one confirm that the following producsts are suitable up to the job?:

amp kit for kx1200.1: http://www.knukonceptz.com/productDetail.cfm?prodID=KOLAK4

amp kit for kx650.4: http://www.knukonceptz.com/productDetail.cfm?prodID=KOLAK44

fuse/distribution block: http://www.knukonceptz.com/productDetail.cfm?prodID=FB-1024D

Is there anything I'm missing for this system install - ?

thanks fam -

ahh - ?

what did you say - ?

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: May 03, 2004 at 12:01 PM / IP Logged

Your system will pull a max of 1880 watts, so you need at least 2 guage (1 would be better) power cable from the battery. None of the knukoncepts kits you list is 2 AWG. The distru block would work just fine.

Support the12volt.com

Ketel22

Silver - Posts: 976

Joined: August 23, 2003

Location: United States

Posted: May 03, 2004 at 12:15 PM / IP Logged

he could...run both of the 4ga kits all the way from the battery correct?

Quad L Handyman services

engage_vx

Member - Posts: 24

Joined: April 03, 2004

Location: United States

Posted: May 03, 2004 at 1:11 PM / IP Logged

So - sayin' that I should have a one gauge cable from the battery going into the distribution block and two 2gauge out? (one for each amp)

ahh - ?

what did you say - ?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

System Requirements

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.