the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

DRL for 98 Honda Civic


Post ReplyPost New Topic
< Prev Topic Next Topic >
silverctr 
Member - Posts: 5
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: May 07, 2004 at 7:49 PM / IP Logged  

FYI: I did do a search and found a few helpful threads. :D I want to use the high beams as DRL, but have them shut off when I turn the headlights on. Here's what I got so far since I'm relay wiring challenged:

87-high beam+ with a resistor in line to dim light output

86-swtiched 12v

85-ground

30-switched 12v

Two questions about this setup: Will this even work? Will this shut off when I turn the headlights on? Any help is appreciated here.

boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: May 09, 2004 at 12:51 PM / IP Logged  

The way you have it No its not gonna work. I cant see how the headlights would shut if off.   When the relay is at rest 30 and 87a have continuity. When the coil is energized 30 and 87 have continuity. Study the relay page here at this site. The way I have it figured since the 98 civic has positive headlights (Red wire at the headlight switch use your meter to verify first) you would connect the Red headlight wire to pin 85. Pin 86 would go to ground. 87a would go to your lights. 30 would go to an ignition wire. This is important. You must make sure the ignition wire is just that, an ignition only wire. You dont want it to have voltage in the acc position or if you were to park and turn your key backwards to listen to the radio your lights would be on. This would allow your DRL to come on with the ignition. Since the relay would be at rest 12 volts would pass through 87a til the coil is energized allowing your lights to come on. Once the coil is energized the connection at 87a and 30 is broken and 30 and 87 have continuity therefore leave 87 blank. The coil would become energized by turning on the headlights because you would be using the positive of the headlight wire on pin 85 as mentioned and pin 86 would provide the ground part.

In summary 85 to headlight wire at the headlight switch.   86 to ground 30 ign switched 12 volts 87a to headlight wire. 

Let me know how this works for you.

silverctr 
Member - Posts: 5
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: May 10, 2004 at 3:06 PM / IP Logged  
Thanks boomer. After reading your post I realized I need a SPDT relay. I have a relay that came with my air horns that I thought I could use, but it must be a SPST relay because it doesn't have 87a. Your explanation answered the other questions I had too. Thanks again.
boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: May 10, 2004 at 8:52 PM / IP Logged  
Your welcome come on back and let us know how it worked out in case someone else wants to do the same.
silverctr 
Member - Posts: 5
Member spacespace
Joined: May 07, 2004
Location: United States
Posted: May 11, 2004 at 7:15 PM / IP Logged  

boomer_106 wrote:
Your welcome come on back and let us know how it worked out in case someone else wants to do the same.

I probably won't get to it until this weekend, but if it works, I'll be doing a DIY thread for www.civichatchback.com. If it's cool, I'll post the DIY here as well.

boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: May 12, 2004 at 12:47 AM / IP Logged  
That would be cool

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, August 25, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer