JL audio w0's or w3v2's?

Alright fellas, I currently have two sony xplod 10's and a sony 250wRMS@4ohm mono block amp. The amp is good, and the subs aren't bad, but I am looking for something better. Hence the JL. I am looking to upgrade to a pair of them. I know the w3's are more expensive, but they are dual voice coil. They also require more power. So my question to yall is would my amp be able to run two of them and would it sound good with only 250 watts as opposed to the 300 they want. I would be overpowering the w0's like mad with my amp is my only fear since they only need 125 watts. Anyway, just let me know what you think. I am trying to avoid upgrading the amp. Thanks fellas.

anyone got an opinion here? I could get the old w6's also i suppose, the ones that are really shallow and not the new deep ones, were those any good?

the only other thing I could do it bridge it and wire in parallel to create a two ohm load, and then give the subs 500 watts. since it is probably over rated like you say, wouldn't that work for w3's? but doesn't running a two ohm load create more distortion?

well, if you are going for SQ, then underpowerin them w3's would work nicely. OOOOR, you could get the w3's in a ported box, and whatever the amp puts out should suffice. However, i'd suggest you go to a nice shop that will let you try both out in you car to see which you prefer. Chances are you'll take the w0's though. good luck. 1990 Honda Civic HB:

Clarion DXZ545MP H.U.

2- 6.5" Power Acoustik interiors

Diamond Audio 600.1 amp

Diamond Audio 15" M6MKII

Pyramid PB881X 4 CH. Amp

hrm, thats a nice idea, i think i know just the place too, thanks would the w3's still move at all with the lets call it 200 watts from the amp though?

If you're looking for the JBL BP-600.1 then look no further then www.sounddomain.com for the same price as listed above.