window roll up module in MR2

Home / the12volt's Install Bay / Car Security and Convenience / window roll up module in MR2 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

voltageGSR

Member - Posts: 16

Joined: October 13, 2003

Location: Pennsylvania, United States

Posted: May 27, 2004 at 3:47 PM / IP Logged

installing a window roll up module in mr2.

Wiring diagram pretty simple; I can access all the wires

I need in drivers kick panel? I do not have to run wires into the door?

Diagram shows that module wires need to be between motor and switch thats why I am asking if ok to access wires in kick panel.

Wiring diagram shown:

https://www.the12volt.com/installbay/forum_posts.asp?tid=20761&KW=voltageGSR

however both the left up and the right down are listed as "Green"? If this is true; than how do I hook up the wires in the window rool up module (crimestopper cs-5201). Thanks!

(I LOVE THIS SITE! I am a beginner and nice to be able to get help from experts.)

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: May 27, 2004 at 4:45 PM / IP Logged

Best bet is to cut the wires between the switch and the motor in the door.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

voltageGSR

Member - Posts: 16

Joined: October 13, 2003

Location: Pennsylvania, United States

Posted: May 27, 2004 at 8:14 PM / IP Logged

than i have to run wires through the door?

will it not work if I cut the wires at the kick panel?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

window roll up module in MR2

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.