2004 Canyon Install

Home / the12volt's Install Bay / Car Audio / 2004 Canyon Install (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

gcarter95

Member - Posts: 3

Joined: June 04, 2004

Posted: June 04, 2004 at 10:31 PM / IP Logged

Has anybody done one of these yet? Looking for instructions for removing factory stereo.

gcarter95

Member - Posts: 3

Joined: June 04, 2004

Posted: June 05, 2004 at 6:57 PM / IP Logged

Found what I needed.

Document ID #1332935 - trim plate

This was extremely easy. 5 clips hold the trim plate in, one bottom center,

and 4 located by each corner of the stereo. Pops out easily. Wires can be

disconnected, but they have enough slack to just move the trim plate out of

the way.

Document ID #1334745 -radio

Another easy one. 3 screws, 7mm hex driver, and unplug the harness and

antenna.

*********

I used the Best Kit # BKGMK420 with the pocket. Perfect fit. Best antenna

adapter BAA4B.

I had gone looking for the Peripheral Accessories GMCO data bus interface,

as the descriptions I had seen for the Metra GMRC-01 had left me with the

impression that I would lose the peripheral power function. Installation

descriptions I had found that used this unit indicated a need to run a new

power wire.

That turned out to be incorrect. I bought the Metra adapter, and it

functions perfectly. Took about 5 minutes to attach to the stereo harness

with a few connectors and a crimping tool.

Simple installation, no modification required to the factory harness or

anything else.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 05, 2004 at 7:07 PM / IP Logged

What's a 2004 Canyon?

Support the12volt.com

gcarter95

Member - Posts: 3

Joined: June 04, 2004

Posted: June 05, 2004 at 7:12 PM / IP Logged

Small pickup from GMC, replacing the Sonoma.

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: June 05, 2004 at 7:14 PM / IP Logged

Thanks. Haven't seen one yet. Glad the install was straight-forward for you!

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 Canyon Install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.