2/4 channel amps any choices?

Home / the12volt's Install Bay / Car Audio / 2/4 channel amps any choices? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: June 18, 2004 at 8:52 PM / IP Logged

So you need to go to B and E electronics on scarth street and tell them you need caps for your speakers. They are gonna ask you what frequency you want and I would say get 90 hz for the back and about 120 hz for the 3 1/2's. Hopefully that is gonna be a high enough cut off that you wont blowem up. Short of that you may need to increase the number of speakers you have to get the amount of sound you want.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

xTimx

Copper - Posts: 354

Joined: September 13, 2002

Location: Canada

Posted: June 18, 2004 at 10:37 PM / IP Logged

actually. calvin has caps for the 3.5s and that'll put the frequency at 200hz.

xTimx

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2/4 channel amps any choices?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.