wiring two relays to air ride compressors

Home / the12volt's Install Bay / Relays / wiring two relays to air ride compressors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

02ss

Member - Posts: 20

Joined: June 03, 2004

Location: United States

Posted: June 12, 2004 at 10:28 PM / IP Logged

I basically need a diagram of how to wire two relays to (2) AIR RIDE compressors that is triggered by a pressure switch. Any help with this would be great.

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: June 13, 2004 at 12:29 AM / IP Logged

What are you trying to get the relays to do? Trigger them by what? Alarm keypad?

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 13, 2004 at 1:20 AM / IP Logged

Dude, follow the instructions that came with the system. Chances are you will wire a switched power to pin 86, ground trigger from pressure switch to pin 85, constant power to 30, and 87 will be ouput to compressor(1 only). You will need two relays wired the same way.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

AirNavy

Member - Posts: 20

Joined: November 11, 2003

Location: United States

Posted: June 13, 2004 at 11:37 PM / IP Logged

wiring two relays to air ride compressors - Last Post -- posted image.

Back to Top

AirNavy

Member - Posts: 20

Joined: November 11, 2003

Location: United States

Posted: June 13, 2004 at 11:40 PM / IP Logged

Note 1 would be fused 12V either direct from battery or from an underhood fuse block. This also shows an optional "manual on" switch for the compressors for those times you don't want to wait for the press. sw. to kick on or if the press. sw. should fail.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

wiring two relays to air ride compressors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.