viper 790xv starter kill

Home / the12volt's Install Bay / Car Security and Convenience / viper 790xv starter kill (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ocbaud

Member - Posts: 16

Joined: June 18, 2004

Location: United States

Posted: June 21, 2004 at 1:45 PM / IP Logged

i hooked everything up right and the alarm works perfect except the starter kill. i can still start the truck when it is armed and/or alarm sounding.

i followed teh diagram but the only thing i didnt know if i needed to do was install a diode between the orange wire connecting the brain and the relay. in the diagram is shows a 1N4004 Diode, but says nothing about having to wire it in.

Back to Top

kcalvert_25

Member - Posts: 14

Joined: April 18, 2003

Posted: June 21, 2004 at 2:24 PM / IP Logged

Do you have the black and green wires off the starter kill relay hooked up?

Back to Top

ocbaud

Member - Posts: 16

Joined: June 18, 2004

Location: United States

Posted: June 21, 2004 at 3:33 PM / IP Logged

from the ignition switch harness there is a PURPLE and YELLOW wire.

i have the GREEN wire going to the key side of the PURPLE wire and the BLACK wire going to the starter side of the PUPRLE wire.

the yellow wire from the relay is connected to the yellow wire coming FROM the ignition switch harness

Back to Top

dei user

Member - Posts: 44

Joined: June 22, 2004

Location: United States

Posted: June 22, 2004 at 6:26 PM / IP Logged

u have to get your meter or test light and try one wire and then the other the wire that gives u 12 volts or lights up on your test light is the starter wire.cut wire in half and connect the green wire to the one that going to the key cylinder and the black one to the one that going to the starter the yellow wire from the relay one should be with the yellow one coming from the alarm and the the yellow wire from the relay should go to the main igniton wire the going to the coil pack . if its a chevy car u are doing by the sounds of the colors u are describing it should be a pink wire for the main igniton the of them are accesorys for the ac radio and such things

dei user

Back to Top

ocbaud

Member - Posts: 16

Joined: June 18, 2004

Location: United States

Posted: June 22, 2004 at 9:43 PM / IP Logged

i fixed it. turns out i had the wrong wire hooked up. yeah, it sucks being color blind!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

viper 790xv starter kill

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.