Old 551T. Need help with wiring

Home / the12volt's Install Bay / Car Security and Convenience / Old 551T. Need help with wiring (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Ashez

Member - Posts: 26

Joined: May 08, 2004

Location: United States

Posted: June 21, 2004 at 9:05 PM / IP Logged

I went to Directed.com but theyre not showing anymore car security diagrams. Ive also searched these forums for 551T, but I still have a couple questions some of you might be able to answer. I have the 551T with the 12pin harness, however there are only 11 wires comming out the harness. When I searched these forums, I found out that the only wire I was missing, with the yellow. From top to bottom here are the wire colors in order:

Black, gray, blue, WHITE/ blue, WHITE/ black, 2 brown wires, white, gray (again), orange, and blue/black. Can anyone help me out with a diagram for this? Remember there are only 11 wires, but its a 12pin harness. (I can tap into the harness and add another wire if needed.)

As for the relay, I have 1 free red wire comming out of terminal 86 of the far left relay. Id say its about a 16ga wire, but I dont know what its supposed to connect to. The other wires are:

2 red with 30amp fuses (Im assuming its for the 12v cons.), yellow, brown, orange, pink, black. All heavy gauge wires. Any help will be greatly appreciated. TIA

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 21, 2004 at 9:35 PM / IP Logged

Ask and you shall recieve.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Ashez

Member - Posts: 26

Joined: May 08, 2004

Location: United States

Posted: June 21, 2004 at 11:19 PM / IP Logged

Thanks, but mine doesnt have a status LED on it? Does it matter?

CutDog504

Silver - Posts: 637

Joined: May 14, 2002

Location: Louisiana, United States

Posted: June 21, 2004 at 11:43 PM / IP Logged

you must have the "older" 551t. I have one of those hanging around also. I think it was made in about 95 or 96. Still to this day, I haven't figured out the wiring, so its still sitting collecting dust.

02ss

Member - Posts: 20

Joined: June 03, 2004

Location: United States

Posted: June 27, 2004 at 12:24 AM / IP Logged

If you call DEI they will email you the wiring diagram for the 551T.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Old 551T. Need help with wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.