1995 Ford Explorer, Autopage RF-305

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1995 Ford Explorer, Autopage RF-305 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: June 23, 2004 at 12:37 PM / IP Logged

Does anyone have the alarm diagram for a 1995 ford explorer ???

Back to Top

Jkcan

Member - Posts: 9

Joined: May 11, 2004

Location: United States

Posted: July 04, 2004 at 1:58 PM / IP Logged

+12v yellow.... Ignition GREEN/ purple....starter RED / lt blue....lock pink / YELLOW......unlock pink/green (lock and unlock are a - trigger in the driver's kick panel....parking lights PURPLE / white in driver's kick....door trigger BLACK/ lt blue. let me know if ya need more info.

10 years and counting....

Back to Top

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: July 07, 2004 at 2:05 PM / IP Logged

How Do I Disarm The Factory Alarm?? I Was Told That I Would Have To Connect Two Wires Together.....Something About The Arming, And The Disarming?? I Don't Know, Can Someone Help Me??

Back to Top

Jkcan

Member - Posts: 9

Joined: May 11, 2004

Location: United States

Posted: July 09, 2004 at 4:09 PM / IP Logged

the factory alarm will only arm if you lock the doors(arm the alarm) with the door open....if you get out, close all the doors, then arm the alarm, then the factory alarm is not armed. I have a note here about a dark GREEN/ purple wire in the driver's kick panel, but not sure if it is arm or disarm...check it out. good luck

Back to Top

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: July 25, 2004 at 10:56 AM / IP Logged

Does Anyone Have The Factory Alarm Diagram?

Back to Top

Andrews2186

Member - Posts: 7

Joined: May 21, 2004

Location: United States

Posted: July 25, 2004 at 11:03 AM / IP Logged

I just installed this alarm into my 1995 Ford Explorer and for some reason the LED will not light up and im not sure if it is working or not is there a certain way I can test it?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1995 Ford Explorer, Autopage RF-305

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.