the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

amp question 2


Post ReplyPost New Topic
< Prev Topic Next Topic >
Herald 
Member - Posts: 46
Member spacespace
Joined: May 08, 2004
Location: United States
Posted: June 23, 2004 at 8:34 PM / IP Logged  

  My next amp question is the following in bridged mode the amp is rated at 400 X 1@ 4ohm. now my sub is 400w @ 4ohms. will the amp see this sub @ 2ohm and will the watt output increase and does it matter. i read the amp will see the speaker at half the impeadence in bridged mode  at sounddomain 

A person who carries or proclaims important news; a messenger.
furflier 
Copper - Posts: 236
Copper spacespace
Joined: June 14, 2004
Location: United States
Posted: June 23, 2004 at 9:01 PM / IP Logged  
No you will get the rated amount of power at 4ohm.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, November 30, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer