Making Custom RCA Cables

Home / the12volt's Install Bay / Car Audio / Making Custom RCA Cables (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Sweekster

Silver - Posts: 481

Joined: May 13, 2003

Location: United States

Posted: July 19, 2004 at 11:55 AM / IP Logged

Hello All,

I'm thinking about learning how to make custom rca cables. Does anyone know if a site (with pics) that shows how to properly do it?

Thanks in advance.

Duane...

If you think you're confused, imagine how you feel. Making Custom RCA Cables -- posted image.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 19, 2004 at 12:13 PM / IP Logged

http://www.bcae1.com/rcacable.htm

Support the12volt.com

Back to Top

Sweekster

Silver - Posts: 481

Joined: May 13, 2003

Location: United States

Posted: July 19, 2004 at 12:45 PM / IP Logged

Thanks for the link ..but...I've had that site bookmarked for over a year now. Apparently the site has changed since last month and they are now charging for the info they provide. To get the pics you have to buy the CD. It's only 20 bucks but I was hoping for something a little more on the free side.

Duane...

If you think you're confused, imagine how you feel. Making Custom RCA Cables -- posted image.

Back to Top

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: July 19, 2004 at 12:54 PM / IP Logged

Charging? No charge shows up for me and I get all the graphics. Here's the pertinant one for soldering RCA cables: Conductor soldered to the center pin, shield gathered and soldered to the outer ring. Be sure not to use too hot a soldering iron which can melt the insulation.

Support the12volt.com

Back to Top

Sweekster

Silver - Posts: 481

Joined: May 13, 2003

Location: United States

Posted: July 19, 2004 at 2:08 PM / IP Logged

That makes better sense..I'll try that out.

Duane...

If you think you're confused, imagine how you feel. Making Custom RCA Cables -- posted image.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Making Custom RCA Cables

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.