Remote start with factory alarm

Home / the12volt's Install Bay / Car Security and Convenience / Remote start with factory alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

FredA1974

Copper - Posts: 31

Joined: July 04, 2003

Location: United States

Posted: July 21, 2004 at 12:56 AM / IP Logged

Is it at all possible to ad a remote start to a factory alarm without using 2 different remotes? I have an '03 PT Cruiser and would like to ad remote start to the factory alarm. Range is not a big deal. If so how will I do it and program the remote? Thanks for the help.

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: July 21, 2004 at 7:17 AM / IP Logged

yes its possible, a lots of companies out there make 'em.

just install remote start like normal but ur RS input trigger would be ur door lock/unlock (either one). so no need to program the remote.

dont forget to diode isolate the trigger input wire w/ the lock wire.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

FredA1974

Copper - Posts: 31

Joined: July 04, 2003

Location: United States

Posted: July 21, 2004 at 9:23 AM / IP Logged

Do you know what wires I need to tie into on the alarm to make this work? Why do I have to mess around with the door locks/triggers if all I am doing is remote start the factory alarm alread has door lock/unlock.

Back to Top

hqaudio

Member - Posts: 2

Joined: August 10, 2004

Location: United States

Posted: August 11, 2004 at 1:38 AM / IP Logged

cause thats what ur be using as ur aux & REPROGRAM ur remote

i'm the one

Back to Top

sandsport250

Member - Posts: 5

Joined: August 09, 2004

Location: United States

Posted: August 11, 2004 at 1:47 AM / IP Logged

Hey, I just recently bought the galaxy 5000 rs2w, and I am installing it into a 1997 ford thunderbird, with factory keyless entry. I found out that my car has negative switching door locks, so I hooked it up to the pink wires on the driver side of the car like the wiring diagram told me to do, the problem I am having though is the door lokcs don’t seem to stop running. They make a constant weird noise until I unplug the alarm. It worked fine when I first hooked it up, then I don’t know what happened. Now when I arm and disarm the system it doesn’t work my locks, and I tried “resetting” the memory, that didn’t help, it only does it if I hit lock or unlock on the door, not the alarm, the alarm doesn’t affect my locks at all. Exept when I plug it up, then It pops them both unlocked no problem. Any information would help, thank you. If you need any more info from me please email. Thanks. Chris sandsport250@hotmail.com

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Remote start with factory alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.