helpwith sub installation./SVC vs. DVC

Home / the12volt's Install Bay / Car Audio / helpwith sub installation./SVC vs. DVC (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nychris2004

Copper - Posts: 54

Joined: July 01, 2004

Location: United States

Posted: July 21, 2004 at 9:56 PM / IP Logged

k stupid question...and this isnt for opinions its for help...i got this amp free so im gonna hook it up til i get a good amp..

its a rampage amp610 500 watt 4 channel amp but its 2 ohm stable and it was hooked up before into 2 ophms so i know itll handle it.. now for now, what would be the best way to hook up one or both of these speakers?

1 RF 1000watt peak/500 RMS 12" 4 ohm DVC sub in a tube, and i have 1 12" MA Audio 4 ohm SVC 1100 watt/600 RMS in a custom tuned box.. i want to have a 2ohm load becaue i know my amp can handle it., but what will produce better results?...wiring the 1 12" RF DVC so that it produces a 2 ohm, load, or just using the ma for 1 channel and one of the RF voice coils for the 2nd channel?..or should i bridge or something?..i want to hook this up to get best performance

Back to Top

archemedes

Copper - Posts: 172

Joined: September 08, 2003

Location: United States

Posted: July 21, 2004 at 9:59 PM / IP Logged

for best performance both voice coils need to be hooked up on the rf, I would do jus tthe rf on that amp, and get a second amp for the ma personally

Back to Top

nychris2004

Copper - Posts: 54

Joined: July 01, 2004

Location: United States

Posted: July 21, 2004 at 10:02 PM / IP Logged

how should i wire them to get best performance out of 4 channels?

Back to Top

nychris2004

Copper - Posts: 54

Joined: July 01, 2004

Location: United States

Posted: July 21, 2004 at 10:17 PM / IP Logged

any help please i wanna do this tonight?

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: July 22, 2004 at 12:55 AM / IP Logged

look at your other post and I explained it there.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

helpwith sub installation./SVC vs. DVC

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.