6 10's too much?

Home / the12volt's Install Bay / Car Audio / 6 10's too much? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

speedwayaudio1

Silver - Posts: 879

Joined: March 18, 2003

Location: United States

Posted: July 26, 2004 at 12:28 AM / IP Logged

I built 2 wedge boxes that held 2 subs each. 1 box on the right side and 1 on the left. the amp in the middle behind the center consol. You will have to lose the shelves on the back panel. in fact just lose the panel. you will have room. you can't use real deep subs. I used MSX audio classic 12's a pound of poly fill. each chamber was 1cf. and your subs must be all the way at the bottom of your box. http://msxaudio.com

Big Dave

Search for other posts by speedwayaudio1

xxxvectra

Member - Posts: 9

Joined: July 21, 2004

Location: United Kingdom

Posted: July 26, 2004 at 5:58 AM / IP Logged

My point was, the displacement of say an 18" is more than that of 3 10"s.

speedwayaudio1

Silver - Posts: 879

Joined: March 18, 2003

Location: United States

Posted: July 26, 2004 at 3:52 PM / IP Logged

the point is it would be a real pain to install a single 18 in a reg cab 01' ram pick up. you could get the air space, but you could not mount the amp behind the seat. I know you can mount under the seat, but they don't cool the way they should.

Big Dave

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: July 26, 2004 at 4:26 PM / IP Logged

yes

shott8283

Copper - Posts: 112

Joined: July 17, 2004

Location: United States

Posted: July 26, 2004 at 4:36 PM / IP Logged

so you fit 2 subs in each box and had 2 boxes? and they were 12's? got any copys of the schematics or plans or pics..... not to plagerize but to clerify the possiblities...

shott8283

Copper - Posts: 112

Joined: July 17, 2004

Location: United States

Posted: July 26, 2004 at 4:39 PM / IP Logged

also if i were to go bigger than 10's like 12s or 15's i was gonna go with audiobahns new piston compression subs...slim desighn....12's with only a 4" mounting depth... also...having the sub bottomed out at the bottom of the box....did it change or distort to sound or performance? not being centered in the box

shott8283

Copper - Posts: 112

Joined: July 17, 2004

Location: United States

Posted: July 26, 2004 at 4:40 PM / IP Logged

i already had plans to take out the back panel...in fact its already out

94legend

Silver - Posts: 237

Joined: June 27, 2004

Location: United States

Posted: July 26, 2004 at 9:05 PM / IP Logged

Does this box answer your question?

6 10's too much? - Page 2 -- posted image.

Here is the finish product. I think i've seen one with (12) 12 inches. These are only 10's

6 10's too much? - Page 2 -- posted image.

94legend

Silver - Posts: 237

Joined: June 27, 2004

Location: United States

Posted: July 26, 2004 at 9:07 PM / IP Logged

6 10's too much? - Page 2 -- posted image.

94legend

Silver - Posts: 237

Joined: June 27, 2004

Location: United States

Posted: July 26, 2004 at 9:07 PM / IP Logged

These pictures will answer your questions!

http://www.hzemall.com/images/scl%20truck/P1010001.JPG

http://www.hzemall.com/images/scl%20truck/P1010012.JPG

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.