First fiberglass experience not so good

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / First fiberglass experience not so good (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: July 31, 2004 at 6:57 AM / IP Logged

foil works but it will stick for eternity

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: July 31, 2004 at 8:53 AM / IP Logged

Doesn't matter if the foil sticks to the bottom side of a project. Just don't use foil if you need smooth contours or if your working with a thin peice because the foil lines will come through. I've found that PAM spray works well for a cheap mold reelase and only $ 1.75 per can First fiberglass experience not so good - Page 2 -- posted image.

First fiberglass experience not so good - Page 2 -- posted image.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ice4life8269

Copper - Posts: 112

Joined: March 31, 2003

Location: United States

Posted: August 02, 2004 at 10:19 AM / IP Logged

hey fellas, what about the new "non-stick" foil? anybody try that yet? it might work, probably spay it with pam. i had a bit of trouble with reynolds foil when i was doin the spyder last year, but it might be worth a try with the non-stick stuff and pam.

wd_awak

Member - Posts: 5

Joined: August 09, 2004

Location: United States

Posted: August 09, 2004 at 11:57 PM / IP Logged

instead of all that, just use wax paper. Most people have some in the cabinet, and it works great. I know body men who use it all the time.

"just remember, in the end, everything you do is just everything you've done"

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

First fiberglass experience not so good

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.