what do i set my amp to ?

Home / the12volt's Install Bay / Car Audio / what do i set my amp to ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

durangomanz

Member - Posts: 13

Joined: August 03, 2002

Location: United States

Posted: September 15, 2002 at 5:18 PM / IP Logged

I HAVE A ALPINE MRV-1507 AND NEED HELP AS TO WHAT TO SET MY AMP ON IM RUNNING 2 CERWIN VEGA STROKERS 12S DVCS THE AMP HAS A PARAMETRIC EQ BUILT THESE ARE THE THINGS THAT IT HAS ON IT PHASE 180 OR 0,

WHAT FREQ. SHOULD IT BE SET TO ITS HAS HP 30HZ TO 200, LP 30 TO 200HZ AND IT ALSO HAS A BAND THAT SAYS NARROW OR WIDE 0.5 7.0 what do i set my amp to ? -- posted image.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 15, 2002 at 5:25 PM / IP Logged

The phase you will set to either 0 or 180 after you have the amp and subwoofers set up and running. Set it to what ever sounds more bassy. Set the LP to about 80 Hz and the HP does not need to be set unless the HP switch has been selected. Have the dial for the NARROW and WIDE set to the middle. What this does is sets the parametric EQ to allow for a wide or narrow band for the specific frequency that you choose to be " Boosted ".

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

durangomanz

Member - Posts: 13

Joined: August 03, 2002

Location: United States

Posted: September 16, 2002 at 7:32 PM / IP Logged

THANX

Back to Top

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 16, 2002 at 7:59 PM / IP Logged

no problemo

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

what do i set my amp to ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.