ok this is weird, Ingition wire

Home / the12volt's Install Bay / Car Audio / ok this is weird, Ingition wire (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

DaGr8n8

Member - Posts: 46

Joined: July 25, 2004

Location: United States

Posted: August 04, 2004 at 8:03 PM / IP Logged

lol, very funny.

sooo humm dose ne oen know how to replace a ingition wire ?

flynntech

Copper - Posts: 275

Joined: April 15, 2004

Location: United States

Posted: August 04, 2004 at 11:19 PM / IP Logged

one volt is not 12.....so find the problem!

residual voltage is more common with AC, but I've seen DC show a volt or so after an open. It sounds like a cheap multimeter more than anything.

1. go to the library or take some remiedial english classes (if this is your second language, I apologize. you are doing quite well actually)

2. get a real multimeter and/or don't over-analyize the readings.

3. all the time you have spent on this problem, you could have run a new wire from the battery and tapped into a good ACC in the column or the fuse panel and grounded the HU to the firewall or hump which is better than factory wiring anyways......especially to achive that 50x4 MAX power.

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: August 05, 2004 at 12:13 AM / IP Logged

Point 1 is funny and point 3 is bang on.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

DaGr8n8

Member - Posts: 46

Joined: July 25, 2004

Location: United States

Posted: August 05, 2004 at 1:37 AM / IP Logged

its not the "multimeter" , and i will try to get better at my ingles,

so where do i fine the ingition area to put a new wire onto ?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 05, 2004 at 3:40 PM / IP Logged

Run a fused wire from the yellow wire in the ignition harness(acc) to the red wire coming off of the deck. That will replace your switched power from the radio harness, you should also cover the current switched power wire in the radio harness to prevent shorting when you realize which fuse you blew.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

DaGr8n8

Member - Posts: 46

Joined: July 25, 2004

Location: United States

Posted: August 05, 2004 at 9:17 PM / IP Logged

well then my deck would be on all the time??? im kinda confewsed... (if i dont have an ingition wire to turn hte deck on wiht)

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 05, 2004 at 9:31 PM / IP Logged

You don't wire the turn on wire to the deck to the "ignition" wire, you wire it to the accessory wire. It will not be on all the time, only when the key is in the on and acc position.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

DaGr8n8

Member - Posts: 46

Joined: July 25, 2004

Location: United States

Posted: August 05, 2004 at 11:21 PM / IP Logged

hummm i think that that is the same wire for me , i have one ingition waire( and it turns on when the acc's go on ) and one 12 v constant wire

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: August 06, 2004 at 12:33 AM / IP Logged

ok..... tie a heavy weight to the radio acc wire, then swing it in a circular motion, count to 10, at the very last second before you finish, throw it at the ignition harness..... if this doesn't work now.... consult a REAL professional. If you cant find one of them, contact a translator.

DaGr8n8

Member - Posts: 46

Joined: July 25, 2004

Location: United States

Posted: August 06, 2004 at 1:25 AM / IP Logged

lol so funny funny american man ahaha

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.