04 Navigator running boards

Home / the12volt's Install Bay / Car Security and Convenience / 04 Navigator running boards (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 03, 2004 at 2:35 PM / IP Logged

ok i did the install.......basic install......cust now tells me that the running board doesnt always come out from under the truck...also the memory seats dont work right.....they go up but not forward.....any ideas?????

i know the running boards work when you open the door.....they work fine after the install. its been about a week now and these things are acting up....are the two tied together some how?????

thanks

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: August 03, 2004 at 7:49 PM / IP Logged

I haven't worked on one of them yet, so I'm taking some guesses here. Are the running board coming out when the vehicle is off but not coming out when the vehicle is remote started? That feature might not work when the ignition is on.

No idea on the memory seats.

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: August 03, 2004 at 9:04 PM / IP Logged

Did you fire up the BLACK/ green accessory wire at the ignition switch (assuming you installed a R/S)? If not, the running boards won't work.. As for the memory seats, did you hook them up to your system or they are just not working right in general? Also, what did you install in the vehicle?

Mike

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 03, 2004 at 9:44 PM / IP Logged

hey mike, i used the info that you sent me......the running boards were working...........no i didnt hook them up to my system.........its an Omega Max-E with the Echo-2 transmitter..........i dont think its the system...she said the seats only go up and down......and the running boards work sometimes.....not really sure what she means by sometimes.......i not sure that it has anything tp do with the install, however you know how it goes.....last one to touch it, you broke it!

besides, she blonde.....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Ixj159

Copper - Posts: 68

Joined: March 07, 2003

Location: United States

Posted: August 03, 2004 at 10:59 PM / IP Logged

I know on the lexus' and some of the newer cars u have to connect the key sense wire to the ground w/ run, if not i know the programmed seats and power steering wheel wont adjust. try that if the car ever comes back. not sure if this pertains to lincolns tho.

Eric.

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: August 04, 2004 at 6:01 AM / IP Logged

Use the factory alarm disarm output (probably negative, so add a relay) to pulse 12 volts to the BLACK/ pink (positive, double check this) key sense wire at the steering column. This should activate the running boards when you hit unlock. I can't remember offhand if the factory remote even does this though. The problems she describes might be from using the factory remote one time, then the aftermarket another etc. Not sure if the key sense is related to the seats not working as well, but give it a shot and see what happens.

Mike

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 04, 2004 at 6:51 AM / IP Logged

thanks...............

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 04, 2004 at 6:52 AM / IP Logged

thanks...............are you able to e-mail the wiring info on that truck again......im not able to link up to it.......

thanks,

david

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 05, 2004 at 8:32 AM / IP Logged

DIRECTWIRE™ WIRING INFORMATION - LINCOLN / NAVIGATOR / 2004 / Remote Start

[PRINT THIS PAGE]

12volts	lt. GREEN/ purple	+	ignition harness
Starter	RED / lt. blue	+	ignition harness
Second Starter	N/A
Ignition	blue/lt. green	+	ignition harness
Second Ignition	N/A
Third Ignition	N/A
Accessory	BLACK/ lt. green	+	ignition harness
Second Accessory	N/A
Keysense	BLACK/ pink	+	ignition harness
Power Lock	pink / YELLOW	-	driver kick panel or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel.
Power Unlock	pink/lt. green	-	driver kick panel or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel.
Lock Motor	pink/black	5wi	driver kick panel or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel.
Unlock Motor	RED / orange	5wi	driver kick panel or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel.
Parking Lights+	brown	+	headlight switch or DKP
Parking Lights-	N/A
Hazards	same as turn signals
Turn Signal(L)	lt grn/wht(F), lt grn/org(R)	+	steering column
Turn Signal(R)	wht/lt blu(F), org/lt blu(R)	+	steering column
Reverse Light	BLACK/ pink	+	driver kick, harness to rear
Door Trigger	BLACK/ lt. blue	+	driver kick, harness to rear
Dome Supervision	use door trigger wire
Trunk/Hatch Pin	common with door trigger
Hood Pin	N/A
Trunk/Hatch Release	WHITE/ pink	+	pass. kick panel or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel. This wire is for the liftgate glass release. For the power liftgate open/close use gray/red (-) at the switch in the roof or at the power liftgate module in the left rear quarter panel.
Power Sliding Door	N/A
Factory Alarm Arm	N/A
Factory Alarm Disarm	N/A
Disarm No Unlock	N/A
Tachometer	NOT RED / lt. green	ac	any ignition coil
Wait to start	N/A
Brake Wire	lt. green	+	brake pedal switch
Parking Brake	lt. GREEN/ red	-	parking brake switch
Horn Trigger	dk. blue	-	steering column or VSM
Notes: The VSM (Vehicle Security Module) is high in the passenger kick panel.
Memory Seat 1	BROWN / lt. green	-	module under driver seat
Memory Seat 2	BLACK/ orange	-	module under driver seat
Memory Seat 3	N/A	-

Immobilizer Bypass Module:	Required: Yes	Type: SecuriLock	Part #: 556U or 555U
Notes: N/A

Do it right the first time

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: August 05, 2004 at 4:50 PM / IP Logged

Here ya go David:

http://www.installz.com/index.php?showtopic=106

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Navigator running boards

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.