How many sensors on output?

Home / the12volt's Install Bay / Car Security and Convenience / How many sensors on output? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 13, 2004 at 7:53 PM / IP Logged

How many sensors can you connect to the + output of the shock sensor before it will draw to many amps? Would 4 sensors be enough to burn up the 12v + circuit? Should a relay be used? Thanks for the help!

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 14, 2004 at 1:34 AM / IP Logged

You should never connect power or ground for additional sensors to the original sensor. The only thing that should go to the original sensor is the trigger wires.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 14, 2004 at 2:40 PM / IP Logged

Thanks! Wish the manuals that came with these things gave you important information like that.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How many sensors on output?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.