Mazda RX8 stereo

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Mazda RX8 stereo (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jawbones

Member - Posts: 4

Joined: August 14, 2004

Posted: August 14, 2004 at 10:17 AM / IP Logged

while fitting a phone kit to an rx8 i cut the ignition feed to the stereo and fitted a relay (to mute the stereo) the stereo worked but i then noticed that the display above the stereo was not working so i disconnected the block connector at the back of the stereo and then reconnected it and now neither the stereo or display is working! Anyone know what is wrong? Does it need to be reset at a maxda dealer with their dianogstic computer?? help

Back to Top

jawbones

Member - Posts: 4

Joined: August 14, 2004

Posted: August 17, 2004 at 2:26 PM / IP Logged

glad to say i figured it out thank for all ur help guys

Back to Top

Jrami608

Member - Posts: 12

Joined: August 24, 2003

Location: United States

Posted: September 13, 2004 at 5:02 PM / IP Logged

Hey if you wouldent mind could you tell me what the problem was.

WiredUp

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Mazda RX8 stereo

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.