the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Running speaker and power wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
zane9000 
Copper - Posts: 69
Copper spacespace
Joined: August 07, 2004
Location: United States
Posted: August 16, 2004 at 8:43 PM / IP Logged  
I know that running a speaker wire next to an unsheilded ac power line is a bad idea but is it that big of a deal if its dc power? im just looking for the best place to run my speaker and power lines to the rear of my car. The easiest thing to do would be to run the speaker wire right next to the power cable for my amp, power inverter, dc/dc power supply... will this give me any issues?
I had Cheetos and wine for dinenr.
xavierny25 
Member - Posts: 24
Member spacespace
Joined: July 28, 2004
Location: United States
Posted: August 16, 2004 at 8:51 PM / IP Logged  
I dont think that would be a problem what u should worry abot is gettin any rca wires to close to that power line.hope this helps
zane9000 
Copper - Posts: 69
Copper spacespace
Joined: August 07, 2004
Location: United States
Posted: August 16, 2004 at 9:01 PM / IP Logged  
yeah, the rcas are on the other side of the car. but why are they any differen?
I had Cheetos and wine for dinenr.
Caraudiorich 
Member - Posts: 7
Member spacespace
Joined: August 15, 2004
Location: Canada
Posted: August 16, 2004 at 9:39 PM / IP Logged  
The RCA's are verry sensitive.  They could pick up lots of noise.  Thats why. 
Caraudiorich 
Member - Posts: 7
Member spacespace
Joined: August 15, 2004
Location: Canada
Posted: August 16, 2004 at 9:39 PM / IP Logged  
The RCA's are very sensitive.  They could pick up lots of noise.  Thats why. 
xploder21 
Member - Posts: 44
Member spacespace
Joined: August 11, 2004
Location: United States
Posted: August 17, 2004 at 3:00 PM / IP Logged  

if you put your rca's next to your amp power + from the battery which is dc you will get interference coming through your subs or speakers due to the rca cables. That's why almost everyone will tell you to put power on one side of the car and RCA's on the other.

promodeepcycle 
Copper - Posts: 152
Copper spacespace
Joined: October 17, 2003
Location: United States
Posted: August 17, 2004 at 3:07 PM / IP Logged  
induced noise..........................."sensitive" rca's......your sub's will not play the freq. of induced noise.. your highs will  speaker level wires do to matter,  you will always run signal on 1 side and all power on the other..
dont be a pet monkey ..use your dmm

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, December 7, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer