Rear window down 4runner

Previously, I read several posts where people were trying to allow thier alarm remote to unroll and roll up the rear window.  I just did it, its a lot easier than you think.

You need:

two constant aux neg - outputs.  Output as long as you hold the button.

If you have these, a window module is not necessary, just 2 relays if your neg output can not handle the amps of the window motor.

The key is to tap into the harness at the rear switch in the door,  This is wired so you do not have to have the key on to activate.  There are three wires, one is WHITE/ black.  The other two are up and down.  All you need to do is apply these wires to ground to move the window without the key on. 

to use the relays, attach them so when the neg - is applied (either up or down) by the output, the window wires go to ground.