2000 Dodge intrepid door lock options

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Dodge intrepid door lock options (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

johngianni

Member - Posts: 10

Joined: August 16, 2004

Location: United States

Posted: August 17, 2004 at 7:36 AM / IP Logged

I have a 2000 Dodge intrepid, I am installing a ProLine REC11 Keyless Entry from Omega..

I had planned on the Single wire install with two resistors and two relays..

Then when I got on this site (which is great) I found on the wiring list for the intrepid that there is a

Drivers Lock

Drivers Unlock

Passanger Unlock

At the BCM.

2 questions

Where/what is the BCM

and Is this positive pulse like the single wire.

I guess one more question is which is the best way to go,

My original plan or use the wires at the BCM?

Thanks for any help....

JohnG

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 17, 2004 at 8:32 AM / IP Logged

The wire you are looking for is located to the rear of the fuse box. The lock and unlock MOTOR wires are at the BCM.

WHITE/ green	+	back of fusebox
Notes: Locks are positive trigger through resistors. Use 2.7K (2700) ohms for lock and 620 ohms for unlock.

Do it right the first time

johngianni

Member - Posts: 10

Joined: August 16, 2004

Location: United States

Posted: August 17, 2004 at 8:41 AM / IP Logged

Thanks for the quick response!

Looks like I should go with my original plan to use the single wire..

Just a quick question then.. The Motor wires at the BCM, can you trigger those with relays? And would this need a +12 to actuate the motors?

I think I'll go with the GREEN / WHITE single wire method, but was just wondering..

Thanks again for the help..

JohnG

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: August 17, 2004 at 8:47 AM / IP Logged

Do not use the motor wires, you will fry it. use the lock and unlock wires

Do it right the first time

johngianni

Member - Posts: 10

Joined: August 16, 2004

Location: United States

Posted: August 17, 2004 at 8:51 AM / IP Logged

No problem. Loud and Clear :)

I didn't think thats what I wanted..

Thanks again for the help!!

2000 Dodge intrepid door lock options -- posted image.

JohnG

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Dodge intrepid door lock options

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.