2004 silverado by-pass kit

Home / the12volt's Install Bay / Car Security and Convenience / 2004 silverado by-pass kit (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

woosh

Member - Posts: 14

Joined: August 26, 2004

Location: United States

Posted: August 27, 2004 at 4:44 PM / IP Logged

I am installing a valet 562T in a 2004 silverado and I was just wondering what is the best and easy to install security bypass kit available.

Back to Top

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: August 27, 2004 at 6:28 PM / IP Logged

you'll need a 555L for bypass and a 456G for data... i rely on DEI modules for their reliability.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: August 27, 2004 at 8:58 PM / IP Logged

I would say a PLDATA is the easiest to install and so far the most reliable that I've seen for bypassing passlock 2. For the locks a GMDL4 would be a good choice.

Mike

Back to Top

woosh

Member - Posts: 14

Joined: August 26, 2004

Location: United States

Posted: August 27, 2004 at 10:04 PM / IP Logged

Thank's guys, I'll give it a try.

Back to Top

lspker

Silver - Posts: 503

Joined: November 23, 2003

Location: Canada

Posted: August 27, 2004 at 10:50 PM / IP Logged

We just did one, tried three different "data" modules, and one hard wire programmable. Had to go to a low-tech dial in the resistor type to get it to work.

Back to Top

kgerry

Platinum - Posts: 3,455

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: August 28, 2004 at 3:29 PM / IP Logged

i've done loads of 03 and 04 CK's and always used the 555L and never had a problem with them.... PLDATA works too but because it doesnt actually broadcast a code the security light on the dash stays on often....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: August 28, 2004 at 7:03 PM / IP Logged

GMDAA is what I use, it does most GM's with OBD-II for passlock and PK3 and locks/trunk/alarm on vehicles that use databus

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2004 silverado by-pass kit

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.