93 MX6 Clutch Bypass Help

Home / the12volt's Install Bay / Car Security and Convenience / 93 MX6 Clutch Bypass Help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mb07

Member - Posts: 44

Joined: August 30, 2004

Location: Ontario, Canada

Posted: August 30, 2004 at 11:54 PM / IP Logged

I just threw a Compustar in my 93 MX6 5 speed obviously and everything's fine except I cant get the clutch to bypass. Usually there are 2 wires on top of the clutch pedal which you join together and the clutch is now bypassed. I did that and the car still wont start without pressing the clutch. Am I doing something wrong or is there a little trick to this?

Back to Top

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 31, 2004 at 1:19 AM / IP Logged

the clutch system could be an open circuit type. i know mitsubishi has it on their car.

meter both wire, one wire will loose ground when clutch is depress.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

93 MX6 Clutch Bypass Help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.