Baretta Alarm Wiring Diagram?

I picked up a Baretta Alarm new from another installer that was running his own mobile install service...

I was wondering if anyone knows of a Website I can check out to look up some info on this alarm? I didn't get the wiring diagram for the alarm and would like to find out, and maybe some additional information about it..

WHICH MODEL DO YOU HAVE?  M-2, M-4 OR M-5 ADVANTAGE

RED= 12 VOLTS

YELLOW= IGN 12 VOLTS

ORANGE= NEGATIVE WHEN ARMED OUTPUT  (STARTER KILL RELAY)

BROWN= SIREN+

BLUE/WHITE= NEGATIVE THIRD CHANNEL OUTPUT

WHIT/RED=NEGATIVE PASSENGER DOOR UNLOCK OUTPUT

BROWN / WHITE= NEGATIVE HORN OUTPUT

BLUE= NEGATIVE INPUT TRIGGER (PIN SWITCH)

GRAY= SECOND NEGATIVE OUTPUT (TRUNK POP)

PURPLE= POSITIVE DOOR TRIGGER

GREEN= NEGATIVE DOOR TRIGGER

CALL ME AT (661)733-0342   (SAM) AND I WILL FAX YOU THE OWNERS MANUAL

WE INSTALL ABOUT 300 BARRETA ALARMS A MONTH, HAVE HAD MINOR PROBLEMS WITH L.E.D LIGHT BURNING OUT, OTHER THAN THAT ITS BEEN A GREAT ALARM SO FAR.

I NEED TO KNOW WHAT MODEL YOU HAVE FIRST

I have it aswell

I am in Toronto

Let me know

It's the M2000..

I was hoping it had unlock and lock outputs..

after the wires here. I have 3 wires left on the brain..here

white -  (prefused - 10A)

BLACK/ white -

black - (I'm assuming ground)

Thanks again..

WHITE= POSITIVE PARKING LIGHT OUTPUT

BLACK/ WHITE= NEGATIVE DOME LAMP SUPERVISION OUTPUT(MUST USE RELAY)

BLACK= CHASSIS GROUND

By the way, there was a fellow from the U.K that left a message on my voicemail the other day, I tried to return the call but for some reason the phone # didn't work. I even called my long distance carrier and they said i had the right country code and all so i'm assuming the # was just wrong. Any way, call me back if you still need help or email me at SAMUELIBARRA@MSN.COM