the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Sound Absorbing from matress foam?


Post ReplyPost New Topic
< Prev Topic Next Topic >
mrdragon 
Copper - Posts: 121
Copper spacespace
Joined: October 08, 2003
Location: Australia
Posted: September 03, 2004 at 9:24 PM / IP Logged  
Hi guys just wondering if any of you use the matress foam to eliminate sound probs in the back of the car? Will it work???
Cheers :)
auex 
Platinum - Posts: 5,041
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 23, 2002
Location: Arizona, United States
Posted: September 03, 2004 at 9:32 PM / IP Logged  
Define sound problems.
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.
I've been sick lately, sorry I won't be on much.
mrdragon 
Copper - Posts: 121
Copper spacespace
Joined: October 08, 2003
Location: Australia
Posted: September 03, 2004 at 9:39 PM / IP Logged  
Ok as i said ...i got a sub at the back, when i turn the bass up i can hear there is it's not hit hard at the same time there is sound like it hit again the metal...but i dun know where it is.
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: September 04, 2004 at 11:34 AM / IP Logged  
Sound deadening can be addressed by using one of the three methods, or, a combination of the three.
1. Decoupling = Is to limit the ability of the sound to move from one medium to another. Decoupling will reduce midrange and bass sounds.
2. Deadening = The idea of deadening is to absorb the sound energy that goes through the vehicles fabrique or material(s) it is very effective at reducing low frequencies.
3. Increased mass = Requires more SPL or energy to move the greater weight / mass. but eliminate highs or treble tones.
Regards
EVIL Teken . . .
jeffchilcott 
Platinum - Posts: 2,483
Platinum spacespace
Joined: April 11, 2002
Location: United States
Posted: September 04, 2004 at 11:43 AM / IP Logged  
i would just rubberize the whole trunk     what kind of vehicle sounds like someything with a large trunk
2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR
2007 USACI World Champion
2007 World Record
2006 USACI Finals 2nd Place
Sebastian018 
Silver - Posts: 364
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 01, 2002
Location: United States
Posted: September 04, 2004 at 2:32 PM / IP Logged  
I used matress foam once, (i didnt have money to spent on dynamat (now im using dynamat) it did work but not as much as dynamat. I will help you .....

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer