Matching Amps with Speakers RMS

Home / the12volt's Install Bay / Car Audio / Matching Amps with Speakers RMS (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: September 09, 2004 at 12:31 PM / IP Logged

i would say if you are really trying to achieve SQ. go with a single 10 or a single 12. For the time I am running one eclipse TI. running 800rms to the one sub and I can still blow everyone's doors off on the road and still achieve a great quality of SQ

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

hurtado_roberto

Copper - Posts: 196

Joined: July 30, 2004

Location: United States

Posted: September 09, 2004 at 2:05 PM / IP Logged

A two channel amp is like two separate amps in one unit right, so if I bridge the two speakers or if I connect them in stereo each channel will still be presented with a two ohm load.

I think I finally understood.

Are multiple subs mostly used for SPL competitions?

Poly Dollies

Search for other posts by hurtado_roberto

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: September 09, 2004 at 4:58 PM / IP Logged

multiple subs are used for day to day head pounding to spl yes. commonly i have only seen 1 sub maybe 2 in most SQ cars, they arnt going for the pounding bass but a low end to compliment the mids and highs....dont get me wrong i always say 10's for SQ but I did see a memphis audio vehicle that was running 1 power refference 15 so you ever know

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Matching Amps with Speakers RMS

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.