Post pics of your systems. Done or not

Home / the12volt's Install Bay / Car Audio / Post pics of your systems. Done or not (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

awilliams64

Member - Posts: 40

Joined: August 10, 2004

Location: United States

Posted: September 12, 2004 at 12:46 PM / IP Logged

we did this for a radio station where i live and its also sponsered by budweiser. they take it around to concerts and things and we get it from time to time when we do events at our stores

awilliams64

Member - Posts: 40

Joined: August 10, 2004

Location: United States

Posted: September 12, 2004 at 10:32 PM / IP Logged

here is another car that i did, lots of jl audio

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: September 15, 2004 at 10:40 PM / IP Logged

heavilymedicate wrote:

How is that USacoustics USB600D? I was thinking about picking one up.

I believe this model is discontinued now. Crutchfields had them for like 4 days at $120 and I was lucky to get one ordered. The new model # is USX600D, and the only difference I can tell by looking at pictures is the blue light, which changed from a pinhole to a light bar. And the power increased by about 50 watts somehow. My bet is it's still the same amp, might have been borderline underrated before, but you know how competition is! All in all, I like it for its simplicity and small size, and it has a higher than average efficiency for class D. The specs for THD are better than comparably-priced amps, too, from what I have seen. Provides good clean power and stays cool.

An upgrade I'll make in the future is the sub, which I'll change to a 350-400 RMS. I'll get a DVC 4 ohm and run the amp at 2 ohm. But, grab one of these if you can find one. I think they're a good value.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

another-kelly

Silver - Posts: 618

Joined: July 11, 2004

Location: United States

Posted: September 15, 2004 at 11:59 PM / IP Logged

hey Velocity, did you do write up of that install (a Probe i think for a grocery getter mom) in a mobile mag? i remember reading/seeing it

Silverciv

Member - Posts: 23

Joined: January 30, 2004

Location: United States

Posted: September 16, 2004 at 12:55 AM / IP Logged

here is some of what i have done:

2005 scion xb (my vehicle)

brief run through of the items installed or waiting to be installed:

Headunit: Eclipse CD5423

EQ: Audiocontrol EQS

X-Over: Audiocontrol 6XS

Amp: USA Amps USA-4300X

Front Speakers:

CDT CL-641

Rear Speakers:

CDT CL-6X

Amp: USA Amps USA-600

Subs: (2) Dayton 12" DVC

https://img.photobucket.com/albums/v141/xbofmnx/driverkick.jpg

https://img.photobucket.com/albums/v141/xbofmnx/passkick.jpg

https://img.photobucket.com/albums/v141/xbofmnx/deck.jpg

(I need to f/g the stereo in place and throw away that ugly mount)

https://img.photobucket.com/albums/v141/xbofmnx/driversside.jpg

https://img.photobucket.com/albums/v141/xbofmnx/passside.jpg

https://img.photobucket.com/albums/v141/xbofmnx/System/rear.jpg

https://img.photobucket.com/albums/v141/xbofmnx/System/right_1.jpg

https://img.photobucket.com/albums/v141/xbofmnx/System/left_1.jpg

pertty much thats about it i hope to have the system fully installed by this weekend

kfr01

Gold - Posts: 2,121

Joined: April 30, 2003

Posted: September 16, 2004 at 2:11 AM / IP Logged

Looks like that will be a nice system. Post your completed pics this weekend! Where are the CDT's?

New Project: 2003 Pathfinder

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: September 16, 2004 at 6:35 AM / IP Logged

another-kelly wrote:

hey Velocity, did you do write up of that install (a Probe i think for a grocery getter mom) in a mobile mag? i remember reading/seeing it

Yup this was the vehicle that I did that article for. The Vehicle was a Plymouth Laser or Mitsubishi Eclipse Turbo.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

ctravis

Member - Posts: 31

Joined: August 12, 2004

Location: United States

Posted: September 16, 2004 at 12:59 PM / IP Logged

This is my JL Audio 10w7 fiberglassed in the wheel well of my 2001 eclipse. I have alpine type x 6.5" components bi amped off of the JL 300\4, and a 500\1 for the sub. I'm still not sure what I'm going to do with the amps yet. Any Ideas or suggestions would be great.

I also just finished another eclipse spyder with a 12w7 in the wheel well, with a JL 500\1, MB Quart QSD's up front, and premiums in the rear, with a JL 450\4.

Post pics of your systems. Done or not - Page 3 -- posted image.

sorry about the quality of the pictures. My camera phone is not that great.

haemphyst

Platinum - Posts: 5,054

Joined: January 19, 2003

Location: Michigan, Bouvet Island

Posted: September 17, 2004 at 5:51 PM / IP Logged

Sorry I am alittle bit slow on the uptake guys, but my very hectic lifestyle as the glamourous network administrator has prohibited me from spending too much time in front of the (actually MY computer) computer lately... Oh well, better late than never, eh? And, yes, it needs a wash and a vaccuum, but there ya go

My very unassuming dash

...and completely (mostly) stock door panels

165 Amp alternator from Alterstart

Optima red-top with power cables visible

The trunk, with space for a trip still!

The trunk, from the front.

Custom modified Eclipse 6993 Point Source 6X9's, bi-wired and bi-amped

...the other side

And the envelope into which it all fits! I know, a little plain, but I like it that way...

Thanks for looking!

It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."

stevdart

Platinum - Posts: 5,816

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: September 17, 2004 at 6:02 PM / IP Logged

Haemphyst,

ADODB.Recordset error '800a0bcd'

Either BOF or EOF is True, or the current record has been deleted. Requested operation requires a current record.

/viewimage.asp, line 74< language=>

This is all I get!

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.