bad wire to use?

Home / the12volt's Install Bay / Car Audio / bad wire to use? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

delphidoc

Copper - Posts: 53

Joined: June 13, 2004

Posted: September 12, 2004 at 4:55 PM / IP Logged

stevdart wrote:

And did you subtract the internal resistance of the meter when you tested the ground? I know with mine, when I test with the probes together I get a 0.8 ohm resistance...so I have to subtract that from any resistance measurement I make with it.

I recently bought a Rat Shack DMM (on sale). http://www.radioshack.com/product.asp?catalog%5Fname=CTLG&category%5Fname=CTLG%5F011%5F008%5F002%5F000&product%5fid=22%2D816

When I press the leads together hard enough the resistance shows to be 0.0. Is this DMM subtracting its own internal resistance before displaying a number?

Back to Top

delphidoc

Copper - Posts: 53

Joined: June 13, 2004

Posted: September 12, 2004 at 11:38 PM / IP Logged

Never mind that last post. It read 0.0 for a few seconds, then it showed 0.3. My bad.

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: September 13, 2004 at 12:03 PM / IP Logged

I have one of those weller guns. I will die with that damn thing.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

bad wire to use?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.