box for 2 Soundstream Edge 10'' DVC

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / box for 2 Soundstream Edge 10'' DVC (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

ogjeffg

Member - Posts: 2

Joined: September 09, 2004

Location: United States

Posted: September 10, 2004 at 9:43 PM / IP Logged

I just picked up 2 Soundstream Edge series 10" DVC 300w woofers

All that soundstream says is box should be sealed not ported.

Any idea how I might find some actual box designs for this woofer. Would hate to build a box thinking its gonna work and crap out.

Any help would be great thx

Back to Top

kidtransam

Copper - Posts: 99

Joined: November 08, 2002

Location: United States

Posted: September 12, 2004 at 10:34 AM / IP Logged

im not sure of the model number you have..but i think these subs want .6 cubic feet in a sealed box...if your wanting a square or rectangular box..then figuring air space is very easy...but if you are wanting a very complex box..or fiberglass box..you will have to spend more time on getting your air space right. To figure air space on a square or rectangle box...take the INSIDE measurements and multiply the length times the height times the depth and divide that by 1728. That will give you the air space in cubic feet.

Hope this helps

With a torch and a big enough hammer...it WILL friggin fit!!

Back to Top

93accordSE

Copper - Posts: 203

Joined: February 19, 2004

Location: United States

Posted: September 12, 2004 at 4:17 PM / IP Logged

I would suggest finding the official website for the woofer for ideas, or search on google or yahoo.

Back to Top

ogjeffg

Member - Posts: 2

Joined: September 09, 2004

Location: United States

Posted: September 12, 2004 at 7:58 PM / IP Logged

The model # of the woofers are EG-10X by soundstream. The only this they have is that is should be a sealed enclosure.

Back to Top

Project GT

Member - Posts: 24

Joined: September 09, 2004

Location: United States

Posted: September 12, 2004 at 9:24 PM / IP Logged

so make it sealed problem solved....

and in teh manual it should tell you the cubic ft the box should have for each woofer

[IMG]http://webpages.charter.net/turbokl/pnwavatar.jpg" height=80>

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

box for 2 Soundstream Edge 10'' DVC

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.