the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2003 ram 3500 deisel remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
cr33hz 
Member - Posts: 3
Member spacespace
Joined: September 14, 2004
Location: Canada
Posted: September 14, 2004 at 8:35 PM / IP Logged  
Does anyone have any info on the tach and "wait to start" wires?
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: September 14, 2004 at 8:41 PM / IP Logged  
Diesel Glow Plug:   ORANGE / Black    Powertrain Control Module***
*** Tach can also be located at pin 74 behind instrument cluster.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
cr33hz 
Member - Posts: 3
Member spacespace
Joined: September 14, 2004
Location: Canada
Posted: September 14, 2004 at 8:51 PM / IP Logged  
the plugs behind the instrument cluster are 26 pin for two of them and 14 pin for the third one. Do you know a wire color for there? were is the PCM located, all the info I have (installogy) says pass side firewall, however it is not there on this truck.
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: September 14, 2004 at 8:56 PM / IP Logged  
there is no wait to start wire on those trucks.
Tach is Blue/grey or Blue/pink at the PCM low drivers side engine)
If it has a PCM on the passenger firewall, the tach wire is grey/black in the bottom connector.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
cr33hz 
Member - Posts: 3
Member spacespace
Joined: September 14, 2004
Location: Canada
Posted: September 14, 2004 at 9:23 PM / IP Logged  
how do you delay the starter if there is no wait to start? What about the light in the dash?
larkster 
Copper - Posts: 98
Copper spacespace
Joined: October 04, 2003
Location: Canada
Posted: September 14, 2004 at 10:56 PM / IP Logged  
depends which diesel it is there is still a glow plug wire on passanger side still orange black on some models.  if it is not there you will have to put a pulse timer in and set it to 15 seconds or so.  dei 528t works great.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 2, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer