98 s-10 remote start, cranks, no fire

you have to program your alarm for TACH or VOLTAGE and make sure you hook up your by-pass module right.if its a DEI it tells you on the module.if you need more help e-mail me I have the same vehicle

I have the tach hooked up, wire number 20, 4 in from the side. its white. I programmed the tach rate, the engine cranks, but it is like there is no spark, or no fuel. If, I have the Ign 1 and 2 hooked up wrong, would this cause that proble, and why? I dont have passlock, my keys are not vats, or the one with the chip in the head, so thats not my problem. Thanks

okay, i got the 555L.  But still no start.

There are two yellow wires coming out of the collumn, one if you cut, the truck wont crank. thats the one i hooked the starter interupt to. The other if you cut, the truck will crank, but not fire, or fire and die. Thats the one i hooked up to the 555l. I am using a prestige aps786. I can start the truck by key, and remote start if the key in in the run position. but i still cannot remote start. I dont think the status wire on the 555l is hooked up right. does anyone know what the right connections are, or any kind of help at all. this is driving me insane.