the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1998 Honda Accord Alternater problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
krayzie 
Member - Posts: 4
Member spacespace
Joined: March 20, 2003
Posted: September 24, 2004 at 8:46 PM / IP Logged  
heres the deal: my friend has a 1998 honda accord, i put a pioneer head unit in about 4 months ago, and recently there battery has just been dying. they took it to the dealership and the dealership found the radio to be the culprit. according to the dealership, just taking the face off the pioneer head unit prevents battery drainage. i took a look at it. and if the cars in the 'start' position, and you snap the face plate on, automaticly the dome light comes on and the "open door" dummy light pops on. however if the car is just in the 'start' position and u turn on the radio, its perfectly fine. if you turn on the car and its in park the radio is fine. but if you put it in drive, it sounds like an alternator whine. and no matter what if the face plate is on the head unit, the dome light and door open light stay on. I really would apreciate it if anyone could give me some insight! thanks!
-kole
xzkolezx@aol.com
hagmanti 
Silver - Posts: 304
Silver spacespace
Joined: September 14, 2004
Location: United States
Posted: September 25, 2004 at 10:44 PM / IP Logged  
I'm sorry-- this is entirely unhelpful, but I just couldn't resist.
The problem started when you installed in your friend's car. (As any installer knows, the easiest install in the simplest car becomes an evil gremlin when it's in your friend's car.)
Me
krayzie 
Member - Posts: 4
Member spacespace
Joined: March 20, 2003
Posted: September 26, 2004 at 12:36 AM / IP Logged  
cmon pleaseee someone!!
Ishinc 
Copper - Posts: 109
Copper spacespace
Joined: May 22, 2002
Posted: September 27, 2004 at 1:15 AM / IP Logged  
maybe...did you hook up the illum and dimmer wires? i think they are pink and orange. something like that, check your manual. if they are connected, disconnect them and tape them off good so they don't short. see if this helps.....
krayzie 
Member - Posts: 4
Member spacespace
Joined: March 20, 2003
Posted: September 30, 2004 at 11:57 PM / IP Logged  
anyone else???
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 01, 2004 at 1:28 AM / IP Logged  

Did you use a harness adaptor or did you splice into the OEM wires ? If you spliced into them, please give us a wire to wire color matching so we can help you pin point the wiring error.

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
krayzie 
Member - Posts: 4
Member spacespace
Joined: March 20, 2003
Posted: October 01, 2004 at 12:05 PM / IP Logged  
I used a harness, and sodered the connections and covered them with heat shrink tubing....Why would the open door sign come on...i didnt hook up the pioneer  system, so what other wires tap into the door sensor? And they took it by the dealership and they dont think its the alternator
fuseblower 
Silver - Posts: 403
Silver spacespace
Joined: June 25, 2003
Location: United States
Posted: October 01, 2004 at 3:17 PM / IP Logged  
What model Pioneer is it.  It may be the one with the alarm on it.  Some of the pioneers used to have an alarm that sounded when the doors were opened.  This maybe one of those units and the alarm part of the unit is fried keeping the circuit open.
Mongol 
Member - Posts: 3
Member spacespace
Joined: July 22, 2004
Location: United States
Posted: October 06, 2004 at 10:23 AM / IP Logged  
Some newer cars have things like a/c, heater blowers, dome lights, airbags and alarms routed through the stereos you may need to completely review what was going through that OE stereo. In newer GMs you sometimes need to keep the OE stereo in the car and run some wires through it in order to not have your airbags go off right after the install. You may have some problem like that.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 27, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer