Running my amp to highs

your welcome , good luck

So my wiring should look like this right?S-One

1992 Buick Lesabre

Clarion Dxz945MP

2000w Wolfenhag 4 channel amp

2 12" Kicker Solo L7's

I dont think its showing up right, i tried uploading it, then i put it temporarily on my web-page under construction, and it still does not work. if you really want to see it to tell me go to the following site http://www.angelfire.com/ill/sounds43605/S-One

1992 Buick Lesabre

Clarion Dxz945MP

2000w Wolfenhag 4 channel amp

2 12" Kicker Solo L7's

sorry s-one , the pics didnt show up

read above^^S-One

1992 Buick Lesabre

Clarion Dxz945MP

2000w Wolfenhag 4 channel amp

2 12" Kicker Solo L7's

how many rca outputs total does that clarion radio have on the back of it? and how are they labeled?

I think I see your problem a little more clearly now that I looked at your web page. your basicly trying to run a 6 speaker system all from two RCA's from the back of the radio. If thats the case...... I would use the existing RCA cable on the clarion and run it strickty to the subs and the you will have to purchase RCA converters for the front and rear speaker line off the radio. (converters about 20$) You'll need two of them as they are set up in two channel mode. once youve run the speaker wire from the radio front and rears into the converters , then just run the RCAs from that point into the 4 channel amp for the interior speakers. Does that make sense?