Possible to create a softer chirp?

Home / the12volt's Install Bay / Car Security and Convenience / Possible to create a softer chirp? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

shesaidshewas18

Copper - Posts: 96

Joined: September 24, 2004

Location: United States

Posted: October 10, 2004 at 9:50 AM / IP Logged

Is there a way to add relays or resistors to a siren, to make it sound softer?

Does anyone know what siren it is that Clifford gives you with the AvantGuard G5 alarm?

Search for other posts by shesaidshewas18

hagmanti

Silver - Posts: 304

Joined: September 14, 2004

Location: United States

Posted: October 10, 2004 at 2:06 PM / IP Logged

If you put a resistor in series w/ the alarm, it will be quieter. However, the alarm generally will be quieter, not just the chirp. It'd be possible to wire a circuit that would only make chirps quieter-- basically you'd just need another capacitor (in parallel??), but that's a wee bit more complicated, and would definitely require more futzing around to find reasonably good values...

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: October 10, 2004 at 4:48 PM / IP Logged

The unit comes with the 515c which can be programmed via the Cliffnet Wizard to have a soft chirp.

Get the users version of the software, or have the dealer perform the change over for you.

You have three options, off, loud, and soft chirp.

Regards

EVIL Teken . . .

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Possible to create a softer chirp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.