First enclosure question

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / First enclosure question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

realitycheck

Silver - Posts: 751

Joined: September 09, 2004

Posted: October 13, 2004 at 8:35 AM / IP Logged

Alright, this is my first subwoofer enclosure. I have two questions for you guys, but first im going to describe my plans. Ok, I have two 12's and i'm building a fiberglass enclosure with the two subs on the outsides of the box and my amp inlayed in the middle. So obviously I am going to have to insert two vertical pieces of wood to seperat the amp area so that I will have two seperate speaker boxes.

My first question is, What is the best way to cut those pieces of wood and attach the fleece so that you really cant tell that there is wood there separating it?

Second, What is the best glue to use for putting your dowels in place?

Back to Top

93accordSE

Copper - Posts: 203

Joined: February 19, 2004

Location: United States

Posted: October 13, 2004 at 9:15 AM / IP Logged

I am doing one similar to that for a friend, the magnets are going to be facing out though, but the amp will be in the middle separated by mdf. What I am going to do is cut out a curve to flow with the rest of the box design and then cut out the peice of mdf for the amp to make sure I have the right angle and attatch it to the middle peice.

Back to Top

realitycheck

Silver - Posts: 751

Joined: September 09, 2004

Posted: October 13, 2004 at 9:59 AM / IP Logged

Could you explain this part a little more thoroughly for me I got lost on it, "then cut out the peice of mdf for the amp to make sure I have the right angle and attach it to the middle peice."

Back to Top

realitycheck

Silver - Posts: 751

Joined: September 09, 2004

Posted: October 14, 2004 at 7:14 AM / IP Logged

Alright guys I still have the two questions at the top but I also have one more.

I plan on bolting my amp to the bottom side of the fiberglass by gluing some bolts to the bottom side of the glass frame for my amp and then bolting the mdf its sitting on to it.

My Question is this what is the best glue or epoxy to use for these bolts?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

First enclosure question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.