Rookie with new amps and speakers

Home / the12volt's Install Bay / Car Audio / Rookie with new amps and speakers (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tmorefi

Member - Posts: 31

Joined: October 01, 2002

Posted: October 01, 2002 at 12:16 PM / IP Logged

OK, so I have a 4*100w pioneer to run my 4 Kicker 6.5's. I have 6 more MTX 6.5's I need to get an amp for. What type of amp and how much power do I need for the 6 MTX's? How do I wire 6 speakers into a 2 channel AMP? Thanks.

Back to Top

ih8u37

Copper - Posts: 54

Joined: June 06, 2002

Posted: October 01, 2002 at 8:32 PM / IP Logged

I'd say your best bet is to wire them in a series/parallel configuration. Wire two speakers together in series, then wire that set to the other speaker in parallel. Make sure the amp you get is 2 ohm stable in stereo, because each set of three will be showing each channel about 2.6 ohms.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Rookie with new amps and speakers

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.