2002 Ford Focus Alarm/Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 2002 Ford Focus Alarm/Keyless Entry Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bwharvey

Member - Posts: 26

Joined: August 29, 2004

Location: Canada

Posted: October 16, 2004 at 11:03 PM / IP Logged

I have to add on keyless entry to an exsisting aftermarket alarm installed by someone else. I need to know lock system type (negative, resistors etc.) I haven't done one of these vehicles before. If any one has a guide or can give me a tip to save some time would be appreciated. My e-mail is bkharvey@telus.net

Thanks Bwharvey

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: October 17, 2004 at 9:44 AM / IP Logged

Ford

Focus

2000-2002

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	GRAY/BLACK	IGNITION SWITCH HARNESS
Ignition #1:	GREEN/ YELLOW	IGNITION SWTICH HARNESS*
Ignition #2:	N/A
Ignition #3:	N/A
Accessory:	YELLOW	IGNITION SWITCH HARNESS
Brake Light:	GREEN/ RED (+)	AT SWITCH ABOVE PEDAL **
Tach Signal:	BLACK/ LT. GREEN	AT COIL MODULE
Parking Lights:	ORANGE / YELLOW (+)	AT LIGHT SWITCH
Headlights:
OEM Alarm Disarm:	BLUE/LIGHT GREEN	IN DRIVERS KICK PANEL
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This Vehicle Is Equipped With Ford's Passive Anti-Theft System. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. ** This Wire Is Only Active When The Ignition Is On.

Ford

Focus

2000-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	RED	IGNITION SWITCH HARNESS
Starter Kill:	GRAY/BLACK	IGNITION SWITCH HARNESS
Ignition +12 Volts:	GREEN/ YELLOW	IGNITION SWTICH HARNESS*
Dome Lights/Superv:
OEM Horn:
Power Lock:	BLACK/ RED (-)	DRIVER'S KICK IN DOOR BOOT ***
Power Unlock:	BLACK / YELLOW (-)	DRIVER'S KICK IN DOOR BOOT ***
Trunk Release:	BLACK / YELLOW (-)	AT TRUNK RELEASE SWITCH
Alarm Input Wire:
Notes:	*** See Installation Note # 201 - Negative Pulse Door Lock Diagram

Back to Top

bwharvey

Member - Posts: 26

Joined: August 29, 2004

Location: Canada

Posted: October 17, 2004 at 10:15 AM / IP Logged

Thanks boomer_106 I'm going to do this add on this morning so it was perfect timing for the info. Thanks again

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: October 17, 2004 at 10:25 AM / IP Logged

Your Welcome. Glad I could help. Good luck

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2002 Ford Focus Alarm/Keyless Entry Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.