Clifford Matrix RS 3.5 and SES Light on!

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Matrix RS 3.5 and SES Light on! (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 18, 2004 at 3:15 AM / IP Logged

Sup I have a 01' Silverado, and curious to why the "service engine soon" light is on when the truck is started by remote or by key? I already unhook the battery and reset it. It happened after the alarm was installed, and also does the Clifford RS 3.5 remote have a light? How do I program the light if so? One more Q, how do I program the remote for remote starter to be the trunk button? Right now its Lock/Unlock is the lock button and remote start is the unlock.........Thanx!

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 18, 2004 at 9:10 AM / IP Logged

:(~

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 18, 2004 at 9:15 AM / IP Logged

Anyone got a clue to why......heeeeelp!

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 18, 2004 at 2:27 PM / IP Logged

BTW its a 5.3L if it helps!

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 21, 2004 at 3:12 AM / IP Logged

Service engine soon light off, it was the gas cap :), I just need to know if anyone can help on how to program the remote and if the LCD screen has a light like the Viper? Thanx, Adam

kgerry

Platinum - Posts: 3,455

This member consistently provides reliable information

Joined: February 07, 2004

Location: Saskatchewan, Canada

Posted: October 21, 2004 at 9:45 AM / IP Logged

yes it has a light.... you program illumination on or off thru the remote.... i leave mine off as these things are hard enough on batteries as it is......

the little book owners manual you got with it should tell you how this is done.....

Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: October 21, 2004 at 11:44 AM / IP Logged

press all 4 remote buttons at once, then press unlock and the orange light should come on, just the same as the viper remotes.

MECP certified installer

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 21, 2004 at 2:13 PM / IP Logged

Well the 'service engine soon" light came back on, and it was runnin' okay this morning. I left for lunch and my truck WOULDNT shift out of first, what could cause these problems? What wire are you supposed to tap into for the remote start? HELP ASAP! Thanx!

Slammed01

Copper - Posts: 89

Joined: October 17, 2004

Location: California, United States

Posted: October 21, 2004 at 2:18 PM / IP Logged

on the 5.3 does the 2nd ignition wire have to be wired up? Could that be causing this problem? Thanx!

stevent

Copper - Posts: 68

Joined: December 12, 2002

Location: United States

Posted: October 21, 2004 at 3:15 PM / IP Logged

whenever there is a second ignition on the car it does need to be hooked up.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.