Alarm (-) output to 3 relays

Home / the12volt's Install Bay / Car Security and Convenience / Alarm (-) output to 3 relays (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

sm951

Member - Posts: 25

Joined: October 08, 2003

Location: United States

Posted: October 20, 2004 at 9:51 AM / IP Logged

Hi,

I'm thinking about using the single continuous negative output that my RKE emits, when armed, as the ground for the coils of 2 or 3 separate relays. Would I need any diodes or anything else across these 2 or 3 wires?

Thanks in advance,

ampere

Member - Posts: 40

Joined: October 15, 2004

Posted: October 20, 2004 at 10:23 AM / IP Logged

As long as your grounds for your relays are not supplying a load (ie just triggering the relays) you should be fine.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm (-) output to 3 relays

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.