Will it work?

Home / the12volt's Install Bay / Car Audio / Will it work? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cruzan69

Member - Posts: 22

Joined: August 23, 2004

Location: Virgin Islands

Posted: October 22, 2004 at 4:15 PM / IP Logged

I recently replaced my JL 12W6's with 3 12w3v2's. I want to place one of them (12w6) in my other vehicle using a Hifonics Zeus 5 channel ( 50x4 + 200x1 @ 4ohms). The sub only has 2 wiring options for using 1 sub, 12 ohms or 3 ohms. What would be the best option and why/why not? I want to use 1 sub and 1 amp for space reasons.

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 22, 2004 at 4:45 PM / IP Logged

i would run it at 3 ohm if your sub can handle the load...let us know if it is 2 ohm stabe on the mono sub channel

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

cruzan69

Member - Posts: 22

Joined: August 23, 2004

Location: Virgin Islands

Posted: October 22, 2004 at 4:49 PM / IP Logged

4 x 50 Watts + 1 x 200 Watts @ 4 Ohms

4 x 100 Watts + 1 x 300Watts @ 2 Ohms

2 x 200 Watts + 1 x 300 Watts @ 4 Ohms

New Hifonics 20th Anniversary Heat Sink Design

Illuminated Hifonics Badge

Illuminated Maxxsonics "M"

Ultra-Fi MOSFETS

Zeus EVXP (Exponential Vari-Power Supply)

SPC - Simpatico Coil Design

HSMD - Hifonics Surface Mount Design

Fully Adjustable

4 Gauge Power Connectors

Class A/B Operation

Maxi-Fuse

Gold Plated Inputs and Outputs

4/2 Ohm Stable

Audio Vibrations Full 1 year warranty

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 22, 2004 at 4:54 PM / IP Logged

I would run your sub wired at a 3 ohm combo, and wire it to your sub channel in stero mode, this will get you about 250rms at 12 ohm you would barly move it

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Will it work?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.