GM-U7 wiring help

Home / the12volt's Install Bay / Car Security and Convenience / GM-U7 wiring help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

naamanf

Member - Posts: 22

Joined: October 18, 2004

Posted: October 25, 2004 at 8:23 PM / IP Logged

I am using the GM-U7 on a 2003 Yukon. It has a green ground output that is to the alarm door trigger. It has a +input from the dome light. Now what functions do these server? The only thing I can think about the door trigger is that it gets a signal over the databus when a door is open and it just makes the install easier (it least thats what I hope it does) The dome light I have no clue. Any ideas?

misterjimbo

Silver - Posts: 535

Joined: October 11, 2003

Location: Michigan, United States

Posted: October 25, 2004 at 8:59 PM / IP Logged

not familiar with a gm u7, but all the modules i use have a + input that you hook up to the dome light and a negative output that goes to the alarm. I think that answers your question, if not pm me and i will try to help you out

naamanf

Member - Posts: 22

Joined: October 18, 2004

Posted: October 25, 2004 at 9:09 PM / IP Logged

Thats what it seems it does. Just can't figure out what purpose it serves.

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: October 25, 2004 at 9:57 PM / IP Logged

when you remote start and shut down these trucks the interior light comes on, this circuit prevents the alarm from triggering when you remote start and when the remote start shuts down

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

GM-U7 wiring help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.