Adding door lock switch, relay question

Home / the12volt's Install Bay / Relays / Adding door lock switch, relay question (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

cavyinthegarage

Copper - Posts: 52

Joined: November 30, 2002

Location: United States

Posted: October 27, 2004 at 9:44 PM / IP Logged

hello, I just purchased the spal door lock switch, I want the switch to only work when the ignition is on. So can I use a relay to change the polarity <ign wire +>

to - trigger on the switch side without harming the alarm brain or actuators. So If I can change the polarity I see how to do that on the left. thanks

Search for other posts by cavyinthegarage

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: October 28, 2004 at 11:32 AM / IP Logged

Shouldn't be hard. Wire the switch to pass ign +12V. Then 2 relays for 5 wire locks. But wire 85 as ground and 86 as switch.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding door lock switch, relay question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.