Add warn-away chirps

Home / the12volt's Install Bay / Car Security and Convenience / Add warn-away chirps (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

masterrh

Member - Posts: 7

Joined: July 08, 2004

Location: United States

Posted: November 03, 2004 at 12:05 PM / IP Logged

I just discovered that apparently the Autopage 850 doesn't actually give warning chirps. It tells the transmitter, but the car itself doesn't chirp, which is more important to me than the full alarm. Is there any way I can 'create' warning chirps through another input or relays? I have a dual shock sensor and a dual proximity sensor. Thanks!

Back to Top

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: November 03, 2004 at 5:54 PM / IP Logged

86 & 87 = Fused +12 volts

85 = Negative Pre-warn output from sensor, with a one (1) ampere diode placed in series. Cathode / band side toward sensor.

30 = Positive input to siren

87a = Positive output from alarm system.

Knowledge is power. But only if you apply that knowledge in a positive way, which promotes positive results in others.

EVIL Teken . . .

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Add warn-away chirps

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.