Cliffnet Wizard not running.

Home / the12volt's Install Bay / Car Security and Convenience / Cliffnet Wizard not running. (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

naamanf

Member - Posts: 22

Joined: October 18, 2004

Posted: November 04, 2004 at 6:53 PM / IP Logged

I am having problems running Cliffnet Wizzard Pro. The first screen comes up that says if the car is running and if the alarm is armed and it works fine. When I press "continue" and it looks for the system config it just freezes up. Any ideas? Any body have access to any DEI tech tips on this? Port settings?

Cav3Kim

Member - Posts: 16

Joined: April 07, 2004

Location: United Kingdom

Posted: January 04, 2005 at 10:14 AM / IP Logged

do you have a hardware standard uart serial port?

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Cliffnet Wizard not running.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.